Mercenary Warband — Sellswords for Hire

Mercenary Sword Axe STL

Name: Mercenary Sword Axe STL — DnD Fantasy Dual Wield Sellsword Warband Miniature 3D Print Tabletop
Brand: DnD Miniatures STL
SKU: mercenary-sword-axe
Price: 4.00 USD
Availability: InStock

$4.00

USD
Instant Download

✓ Watertight — printable FDM + Resin 32mm tabletop → 200mm+ display ⚡ Instant download

Pay with PayPal or card — instant download

🛡 Covered by PayPal Buyer Protection · If a file fails to print, we fix it or refund you — our promise.

Adventurers also print

Mercenary Captain$4.00

Mercenary Spearman$4.00

Mercenary Sword Shield$4.00

or buy on Etsy

Buy on Etsy →

Complete the warband

Mercenary Warband Pack 6

All 6 minis for $30.00.

View pack →

What you get

📦 Print-ready STL file — repaired, watertight, oriented for printing
📋 Print report — thin-wall & overhang scan included
🖨 Full license — personal use + selling your physical prints

Specifications

Mesh density260k triangles

Model size83 × 75 × 120 mm

D&D scale classMedium

WatertightYES — printable

ZIP size6.91 MB

Format.STL (FDM + Resin)

SupportsNot included (add in slicer)

LicensePersonal + physical sale

Price$4.00 USD

About This Sculpt

Two weapons and no patience — this fighter stands amid a wrecked battlefield with a longsword hanging point-down from his right hand and a bearded axe gripped low in his left. Chainmail shows under a studded leather skirt, twin pauldrons cap his shoulders, and the sculptor gave him the flat stare of someone counting your coin before you have offered it. He makes a brutal second-in-command for a mercenary warband; run him as a Berserker or a Veteran trading the crossbow for that axe, and let him hit the backline while the captain monologues. Print-wise both weapons angle slightly away from the legs, so place light supports under each blade edge — the sword tip drops close enough to the base rim that a single strut usually bridges it. The chunky round base keeps him stable on the table.

Download links appear right after payment — Etsy checkout also available above.
Need a different format or custom adjustments?

Message us on Etsy

D&D & Tabletop Use

🎲 Statblock & Encounter Suggestion

Use as a Berserker (MM p.344, CR 2) with Two-Weapon Fighting, a Veteran (MM p.350) re-armed dual-wield, or a homebrew dual-wielding Battle Master fighter. The aggressive piece of the warband — point him at the squishiest target.

Print scale tip: 32mm tabletop (D&D 5e / Pathfinder grids) ≈ 27% in your slicer. 75mm collectible ≈ 60%. 150mm bust ≈ scale to 1.25x. Watertight, oriented for printing.

Full Product Details

Two weapons, no shield, no patience — sword in one hand, hand-axe in the other, the kind of mercenary who gets paid extra to break the enemy line before the spears get there. He works the contract and the fight at full speed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📦 WHAT YOU GET ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ • 1 .STL file ready to print (instant download after purchase) • Pre-repaired: watertight mesh, optimized triangle count, oriented for printing • Includes a print-report JSON with thin-wall scan + overhang analysis • No supports baked in — add your own in your slicer • Compatible with FDM and resin printers (LCD/SLA/DLP) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📏 SCALE & DIMENSIONS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Final scale: Medium — ~120mm tallest axis (83 × 75 × 120 mm) Scale freely in your slicer: • 28-32mm tabletop → for D&D grid play • 75mm collectible → display piece • 150mm bust → larger display • Triangles: 259,998 • Watertight: YES (printable) • Supports recommended on overhangs (cloaks, hoods, capes) • Note: thin walls detected (30) — print at recommended size or larger to avoid breakage ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙️ PRINTING RECOMMENDATIONS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ • Resin: 0.05mm layer · 1.8-3s exposure · light-to-medium supports • FDM: 0.12-0.20mm layer · 10-15% infill · tree supports • Orientation: print as oriented in file (auto-aligned), or rotate to taste ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎲 FOR D&D & TABLETOP RPG ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Use as a Berserker (MM p.344, CR 2) with Two-Weapon Fighting, a Veteran (MM p.350) re-armed dual-wield, or a homebrew dual-wielding Battle Master fighter. The aggressive piece of the warband — point him at the squishiest target. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 LICENSE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Personal use AND printing for physical sale are allowed (you can print and sell the physical figure). Redistribution or reselling of the digital STL files is NOT permitted. Original fantasy creature design — perfect for D&D, Pathfinder, Frostgrave, KoW, or any tabletop RPG. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 💬 SUPPORT ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ If you have any issues printing or need adjustments, message us and we'll help out.

Questions about Mercenary Sword Axe

What scale should I print Mercenary Sword Axe at?

The mini comes scaled to ~120mm (D&D Medium-class). For 32mm D&D 5e / Pathfinder tabletop scale, set ~20-27% scale in your slicer. For collectible display, 60-75%.

What's the mesh quality of Mercenary Sword Axe?

The mini has 260k triangles — clean enough for FDM at medium-large scales, detailed enough for resin printing at small tabletop scales.

Does Mercenary Sword Axe print well on FDM?

Yes. Recommended FDM settings: 0.12-0.20mm layer height, 10-15% infill, tree supports from the base. Supports are recommended on cloaks, hoods, capes and trailing fabric.

Is Mercenary Sword Axe supported for resin printing?

Yes. Recommended resin settings: 0.05mm layer, 1.8-3s exposure, light-medium supports from the base. The mesh is watertight and oriented for printing. Hollow in your slicer to save resin.

Any specific print warnings for Mercenary Sword Axe?

The model has 30 thin-wall regions flagged by our pre-print scan (cloaks, capes, weapon edges). Print at the recommended scale or larger to avoid breakage. The full thin-wall report is included with the STL.

Can I sell physical prints of Mercenary Sword Axe?

Yes — the license allows you to print and sell the physical figure (conventions, online, custom commissions). What you can NOT do is redistribute or resell the digital STL file itself.

Mercenary Sword Axe STL

Specifications

About This Sculpt

D&D & Tabletop Use

🎲 Statblock & Encounter Suggestion

Full Product Details

Questions about Mercenary Sword Axe

More from Mercenary Warband — Sellswords for Hire

Mercenary Captain STL — DnD Fantasy Sellsword Warband Leader Miniature 3D Print Tabletop

Mercenary Spearman STL — DnD Fantasy Sellsword Pike Phalanx Miniature 3D Print Tabletop RPG

Mercenary Sword Shield STL — DnD Fantasy Sellsword Warband Frontline Miniature 3D Print Tabletop

Mercenary Twin Blades STL — DnD Fantasy Quick Draw Sellsword Duelist Miniature 3D Print Tabletop

Mercenary Veteran STL — DnD Fantasy Old Sellsword Battle Scarred Warband Miniature 3D Print Tabletop

More from the Dungeon

Orc Lord STL — Ragnarok Online Inspired MVP Boss Miniature for DnD 3D Print Tabletop

Minotaur Dual Axe STL — DnD Fantasy Labyrinth Boss Miniature 3D Print Tabletop RPG

Barbarian STL — DnD Fantasy Skull Axe Tribal Warlord Boss Miniature 3D Print Tabletop

Pirate Captain STL — DnD Fantasy Flintlock Pistol Swashbuckler Miniature 3D Print